This post is an update of the second part of my Moto server series: https://lemmy.zip/post/72142441
Rumor has it that keeping an 8-year-old phone permanently plugged in with its equally ancient Li-ion battery might not be the greatest idea ever conceived.
Some even claimed that a phone needs a battery to work.
Very negative people.
Anyway, I removed it.
Pettyl did not care.
nginx: UP PHP-FPM: UP MariaDB: UP WordPress: UP cloudflared: UP sshd: UP
The battery is currently sitting next to the phone, contributing absolutely nothing to the project.
Pettyl is now running entirely from USB power, at around 37°C, while continuing to serve the website like this is completely normal.
There is, however, one tiny detail the haters may enjoy:
It can’t boot without the battery.
So the official Pettyl disaster recovery procedure is now:
- Insert battery
- Boot Pettyl
- Connect USB power
- Remove battery
- Pretend this is enterprise infrastructure
The battery is no longer a battery.
It is the starter motor.
I see no problems with this architecture.
Anyway, Part 3 is going great.
Anything made to be run from battery can work fine without one. Worst case scenario requires you to spoof some I²C communication to properly emulate a battery, but most devices and batteries are far dumber than that. DC is DC, and sometimes you just need to graft something on top for the other pins.
Source: My old laptops charging circuit failed, so I soldered the charger onto the battery pins instead. Then I replaced the actual battery with an Adafruit Itsybitsy 32u4 (because that what I happened to have available) that emulated the battery status of “Charging, nothing to see here, move along” and sent it via I²C